How to Care for Your E-Bike: Essential Tips for Longevity and Performance

ROGUWEX e-bikes have become a top choice for commuting and outdoor activities, thanks to their superior performance and durability. To keep your e-bike in optimal condition and enjoy more rides together, scientific daily maintenance is essential. This guide will share comprehensive maintenance tips for the core components of ROGUWEX e-bikes, helping you maximize their lifespan and maintain stable performance.

1. Battery Maintenance: Secrets to Long-Lasting Power for ROGUWEX

• Regular Charging: Avoid fully draining the battery (below 20%) before recharging. It’s recommended to recharge when the remaining power is around 30% to reduce battery damage from deep discharge. ROGUWEX original batteries are equipped with intelligent protection chips to prevent overcharging, but it’s still advisable to unplug the charger once fully charged.
• Proper Storage: For long-term inactivity (e.g., winter storage), charge the battery to approximately 50% and store it in a cool, dry place (avoid temperatures above 35℃ or below 0℃). Recharge every 1-2 months to prevent battery depletion.
• Cleaning & Protection: Wipe the battery surface and ports with a dry, soft cloth to remove dust and dirt. Keep the battery away from water or humid environments to prevent port oxidation and ensure stable power supply.

2. Motor Maintenance: Safeguard ROGUWEX’s Powerful Performance

• Remove Debris: After rides (especially in muddy or dusty conditions), inspect the motor housing and heat dissipation vents. Use a soft brush to clean off mud, leaves, and other debris to avoid blocking heat dissipation channels and causing overheating.
• Avoid Overloading: Avoid prolonged full-power riding on steep slopes or with heavy loads. If the motor housing feels hot to the touch, stop and let it cool down before continuing to prevent damage to the motor windings.
• Check Connections: Regularly inspect the wiring harness between the motor and controller to ensure plugs are secure and cables are undamaged. If you encounter power cuts, abnormal noises, or other issues, contact ROGUWEX after-sales service for inspection—do not disassemble the motor yourself.

3. Tire Maintenance: Fundamental Guarantee for Safe Riding

• Maintain Proper Tire Pressure: Refer to the recommended tire pressure (usually 2.5-3.5 bar) marked on the frame. Check pressure regularly with a tire gauge to avoid under-inflation (which increases resistance and reduces range) or over-inflation (which impairs shock absorption).
• Wear Monitoring: Regularly check tire treads for bald spots, cracks, or embedded debris. Clean or replace tires promptly if damage is found. ROGUWEX original tires are recommended to be inspected for wear after 8,000-10,000 km of use.
• Cleaning & Care: Wipe tire surfaces with a damp cloth to remove sharp debris like gravel or glass, preventing punctures and maintaining tread grip.

4. Brake System Maintenance: Core of ROGUWEX’s Safety Line

• Inspect Brake Pads: Regularly check brake pad thickness. If pads are less than 1mm thick (roughly the thickness of a coin edge), replace them with ROGUWEX original brake pads immediately to ensure braking efficiency.
• Alignment & Adjustment: Ensure brake calipers are properly aligned and brakes are responsive. If brakes feel soft or require excessive force to engage, adjustment or maintenance may be needed.
• Lubricate Brake Cables: For mechanical brakes, lubricate cables occasionally with specialized lubricant to ensure smooth operation. For hydraulic disc brakes, check hose tightness—do not disassemble them yourself.

5. Chain & Drivetrain Maintenance: Key to Smooth Pedaling

• Deep Cleaning: Every 500 km or after riding in rain/mud, use a chain cleaner and degreaser to remove oil, dirt, and grime. For thorough cleaning, use ROGUWEX specialized degreaser.
• Precise Lubrication: After cleaning and drying, apply bike-specific lubricant (avoid motor oil) to each chain link. Let it sit for 5 minutes, then wipe off excess lubricant to prevent dust buildup.
• Wear Replacement: If the chain skips gears or a chain checker shows elongation exceeding 0.5%, replace the chain and cassette promptly. It’s recommended to use ROGUWEX original parts for compatibility.

6. Tightness Checks: Prevent Issues in Details

• Tighten bolts on handlebars, saddles, pedals, and wheels to the recommended torque (refer to the ROGUWEX user manual).
• Ensure connections for accessories (e.g., racks, fenders) are secure to prevent falling off during rides.

7. Cleaning & Moisture Protection: Foundation for Longevity

• Daily Cleaning: Wipe the frame and wheels with a damp cloth. Avoid high-pressure water guns on electrical components (e.g., motor, battery). Dry the e-bike thoroughly after cleaning to prevent rust.
• Rain Protection: Wipe the e-bike immediately after riding in rain, focusing on metal parts like the chain and brake discs. Apply a small amount of anti-rust agent if needed. For long-term storage, cover with a dust cover and place in a dry, ventilated area.

8. Professional Maintenance: Official ROGUWEX Support

• It’s recommended to visit ROGUWEX authorized service centers for comprehensive inspections every 3,000 km or 6 months. Services include motor performance testing, battery capacity calibration, and brake system adjustment.
• For complex issues (e.g., motor noise, sudden battery range drop, electrical faults), do not attempt self-repair. Contact ROGUWEX after-sales team for original technical support and warranty services.

Conclusion